WATER TESTING AND PURE WATER / 05
Moisture sensor for industrial gases.
Measure moisture in factory gases.
Moisture in factory gases damages machines and products. A ceramic sensor measures how damp a gas is, even very small amounts, at up to 150 °C.
What it achieves
The key numbers.
humidity range.
trace moisture.
maximum gas temperature.
Problem and fix
The problem this solves.
- 01The problem
Moisture in factory gases damages machines and products.
How it is fixedA ceramic sensor measures how damp a gas is, even very small amounts, at up to 150 °C.
How it works
Step by step.
- 1
Fit
The sensor head goes into the gas line.
- 2
Measure
It reads humidity or trace moisture.
- 3
Display
The meter shows the value.
Key features
Why it works well.
Performs as well as a leading imported sensor.
- Harsh gasesWorks with hot, toxic or flammable gas.
- FastQuick response and recovery.
- LightAbout 200 to 300 grams.
At a glance
The details.
| Range | 5 to 95% RH, or 5 to 100 ppm |
|---|---|
| Temperature | Up to 150 °C |
| Power | Mains or 9 V battery |
| Ready level | Level 9 of 9 (already in use) |
| Scale | Factory |
Costs are indicative and change with your water, site and plant size. We confirm them after testing a sample.
Where it is used
Who it is for.
- Gas plants
- Chemical units
- Power plants
Questions
Frequently asked questions.
Is this technology proven?
Yes. It is at ready level 9 of 9, which means: already in use. Performs as well as a leading imported sensor.
Can we try it on our own water first?
Yes. We test a sample in our NABL-accredited lab and, where it helps, run a small trial on your site before you invest in a full plant.
Do you supply and install it?
Yes. We design, supply, install and start up the system, train your staff, and our lab checks the treated water.
Testing water on the spot
Other ways to fix this problem.
THE NEXT STEP
Fix it on
your own site.
Send us a water sample or a test report. We will check it, confirm this method fits and tell you what it costs to run.
Discuss your problem