Rispri LabsENGINEERING A CIRCULAR FUTURE

INDUSTRIAL WASTEWATER AND ZLD / 04

Ready: level 7 of 9Tested in the fieldTrial plant

Enzyme filter to remove foam and detergent.
Remove leftover detergent and foam.

Treated wastewater still foams because detergent is left in it. Natural enzymes fixed on carbon break down the leftover detergent.

FACTORY WASTEWATER THAT FAILS COD, SMELLS OR MAKES TOO MUCH SLUDGEDelivered by Rispri Labs
Factory wastewater that fails COD, smells or makes too much sludge
Factory wastewater that fails COD, smells or makes too much sludge

What it achieves

The key numbers.

Enzymes

on carbon.

Low

power and sludge.

INR 48

per 1,000 litres to run.

Problem and fix

The problem this solves.

  1. 01
    The problem

    Treated wastewater still foams because detergent is left in it.

    How it is fixed

    Natural enzymes fixed on carbon break down the leftover detergent.

How it works

Step by step.

  1. 1

    Flow

    Treated wastewater flows through the enzyme bed.

  2. 2

    Break

    Enzymes break down detergents.

  3. 3

    Discharge

    Water leaves without foam.

Key features

Why it works well.

Tested in a leather unit.

  • Stops foamBreaks down surfactants that cause foam.
  • Small footprintFits after an existing ETP.
  • No smellClean operation.

At a glance

The details.

TreatsDetergents left after biological treatment
Running costAbout INR 48 per 1,000 litres
Proven atTrial plant in a leather unit
Ready levelLevel 7 of 9 (tested in the field)
ScaleTrial plant
Used inLeather

Costs are indicative and change with your water, site and plant size. We confirm them after testing a sample.

Where it is used

Who it is for.

  • Leather units
  • Laundries
  • Textile units

Questions

Frequently asked questions.

Is this technology proven?

Yes. It is at ready level 7 of 9, which means: tested in the field. Tested in a leather unit.

What does it cost to run?

About about INR 48 per 1,000 litres. The exact figure depends on your water and the size of the plant. We confirm it after testing a sample.

Can we try it on our own water first?

Yes. We test a sample in our NABL-accredited lab and, where it helps, run a small trial on your site before you invest in a full plant.

Do you supply and install it?

Yes. We design, supply, install and start up the system, train your staff, and our lab checks the treated water.

THE NEXT STEP

Fix it on
your own site.

Send us a water sample or a test report. We will check it, confirm this method fits and tell you what it costs to run.

Discuss your problem