Rispri LabsENGINEERING A CIRCULAR FUTURE

INDUSTRIAL WASTEWATER AND ZLD / 13

Ready: level 6 to 9 of 9Already in useTrial to full size

Biofilter for factory smells.
Stop the smell neighbours complain about.

Neighbours complain about the smell from a tannery, ETP or sludge yard. Smelly air is pulled through a damp bed where bacteria eat the smell.

FACTORY WASTEWATER THAT FAILS COD, SMELLS OR MAKES TOO MUCH SLUDGEDelivered by Rispri Labs
Factory wastewater that fails COD, smells or makes too much sludge
Factory wastewater that fails COD, smells or makes too much sludge

What it achieves

The key numbers.

10 to 100 m³/h

small units.

Low

pressure drop, low power.

Long

media life.

Problem and fix

The problem this solves.

  1. 01
    The problem

    Neighbours complain about the smell from a tannery, ETP or sludge yard.

    How it is fixed

    Smelly air is pulled through a damp bed where bacteria eat the smell.

How it works

Step by step.

  1. 1

    Collect

    Smelly air is pulled from tanks and vents.

  2. 2

    Pass

    It flows through a damp bed of natural media.

  3. 3

    Clean

    Bacteria in the bed eat ammonia, hydrogen sulphide and other odours.

Key features

Why it works well.

From small units of 10 to 100 cubic metres an hour up to full factory size.

  • NaturalBacteria do the work.
  • Low running costLittle power needed.
  • Designed to your siteSized after studying your odour sources.

At a glance

The details.

RemovesAmmonia, hydrogen sulphide, other odours
Air flow10 to 100 m³/h, larger on request
Ready levelLevel 6 to 9 of 9 (already in use)
ScaleTrial to full size
Used inLeather, towns

Costs are indicative and change with your water, site and plant size. We confirm them after testing a sample.

Where it is used

Who it is for.

  • Tanneries
  • ETPs and STPs
  • Feed and fish plants
  • Sludge yards

Questions

Frequently asked questions.

Is this technology proven?

Yes. It is at ready level 6 to 9 of 9, which means: already in use. From small units of 10 to 100 cubic metres an hour up to full factory size.

Can we try it on our own water first?

Yes. We test a sample in our NABL-accredited lab and, where it helps, run a small trial on your site before you invest in a full plant.

Do you supply and install it?

Yes. We design, supply, install and start up the system, train your staff, and our lab checks the treated water.

THE NEXT STEP

Fix it on
your own site.

Send us a water sample or a test report. We will check it, confirm this method fits and tell you what it costs to run.

Discuss your problem